British Ammo Boots Without Toe Caps: WWI, RAF and Canada
Plain-toe British ammo boots get far less attention than the capped version, and I've never quite understood why, because they turn up in a surprising number of impressions. There's no toe cap, so the front of the upper is one clean sweep of leather. That small difference is what puts this boot in a Great War kit list, an RAF or Royal Marines one, or (the reason most people I know own a pair) a Canadian one from the Second World War.
The British Ammo Boots (No Toe Cap) are our reproduction of that style. They arrive with the hobnails and the heel and toe irons already fitted, which spares you an evening with a cobbler's last and a hammer. And they're made in US sizes. I'll come back to that, because it's the thing that catches people out.
Where the Name Ammo Boots Comes From
"Ammunition boot" was never one single pattern. It's a generic name for a whole family of heavy, studded ankle boots made in a run of different patterns, and they were the standard British Army boot from at least the mid-1860s until the 1960s, when the Boot, Direct Moulded Sole (DMS to everyone who wore one) took over.
Nobody seems entirely sure about the name itself. One explanation ties it to the boots coming from Woolwich, the Royal Artillery's headquarters, rather than Horse Guards, and being of "ammunition quality". Another, which you'll hear on forums, is that the hobnail heads looked like the heads of bullets. I lean towards the first, but I wouldn't bet my own boots on it.
The Plain Toe in the Great War
The toe cap wasn't always part of the design. The Pattern 1037 boot, made from 1887 to 1907, had woven cotton laces, a plain leather counter and no leather toe cap at all. Later patterns added the pebble-grained cap that most people now think of as "the" ammo boot.
Plain-toe boots like this one were among the many types British soldiers wore in the First World War. I'm deliberately not tying it to one pattern number here, because the patterns overlap and collectors argue about the details, and I'd rather be vague than confidently wrong.
One forum veteran of these debates put it bluntly: in his view the Canadian WWII boot was simply the same type England had used in the First World War. That's an opinion, not a regulation, but it does explain why one pair of boots can cover two wars.
RAF, Royal Marines and the Canadian Army
By the Second World War the capped boot was the usual British Army item, but the plain-toe style carried on elsewhere. It was issued to the Royal Air Force and the Royal Marines, so if you're portraying either service, this is the boot you want rather than the capped one.
The Canadians are the big one, though. The standard ammunition boot made by Canadian suppliers was very close to the British pattern, except that Canadian boots lacked the toe cap. They were also given heel and toe irons and were hobnailed, and they were worn with Pattern 37 web anklets, tabs pointing to the rear, with the battledress trousers bloused over the top.
There were other differences too, if you want to get properly into the weeds:
- Some say the Canadian boot differed from the British one in how the upper was attached to the lower, not just in the missing cap.
- The Canadian version had an internally reinforced steel heel, with a steel horseshoe on the heel and a steel crescent on the toe, both screwed on.
- Motor regiment troops riding in steel-floored vehicles got the same pattern with a rubber sole.
It's also a myth that every Canadian in Normandy wore the taller buckled "Third Division" boot. Those were widely issued, but the ankle-high ammo boot remained the standard footwear.
Hobnails, Heel Irons and a Bit of Argument
Hobnail layouts are where reenactors get really particular. One event's authenticity guide for British boots lists a pre-war pattern of 25 nails per boot, then 15 after 1941 and 13 after 1942. A collector on a Canadian forum remembered 15 as the original British count. A different forum post puts the regulation figure at 13. So there's no single answer, and photographs of Canadian riflemen show different layouts side by side, including an "austerity" pattern with two lines of nails just behind the toe plate. There's even a late-war photo of a Bren gunner with his boots nailed the Great War way.
My advice is simple. Pick the date of your impression, find a photo of the unit around then, and don't lose sleep over it. If you really need a particular layout, you can re-nail them, and at least one of our customers has done exactly that.
One period complaint I can confirm from experience: nailed soles are lovely on grass and mud and a menace on hard ground. I've had a near miss on a wet cobbled square at an event, the sort where your feet go one way and your mess tins go the other.
Wearing British Ammo Boots Today
Sizing first. These are US sizes, and the reviews agree that UK wearers tend to go up one (a UK 10 ordering a US 11 seems to be the common story). If you're between sizes, or you wear thick wool socks, size up and add an insole.
Then breaking in. Reviewers say the leather is stiff out of the box, which is normal for this kind of boot. The old trick of getting them wet and wearing them till they dry on your feet works, but one customer found the dye ran badly the first time, so don't do it in your good socks. Grease them well afterwards, and grease the laces too if you're lacing them tight. After that they mould to your feet in a way modern boots never quite do.
For a Canadian impression, pair the plain-toe ammo boots with web anklets. For the Great War, puttees. For the RAF it depends on what you're portraying, so check your photos. Anyway, they're not complicated boots, which is rather the point.
If you want a pair that fits a lot of uniforms instead of just one, the British Ammo Boots (No Toe Cap) are hard to beat.
What Our Customers Say About It
Plenty of the reviews come from Canadian reenactors. One wrote that they "fit nicely with my original 1944 Canadian uniform". Another bought them for a Canadian impression and, being a UK10, "ordered a size 11 and got a perfect fit."
They last, too. One customer bought a pair in 2005 and "only had to resole them after 12 seasons." And on breaking in, someone else found them "remarkably comfortable once broken in and after being properly laced and greased." Read the rest on our customer reviews page.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of British Ammo Boots Without Toe Caps here: Get Your British Ammo Boots Without Toe Caps












